Fuel pressure regulator, 3.0 E engine. Diagram GR08-T02, Item 4.

Fuel pressure regulator, 3.9 E engine. Diagram GR08-T02, Item 4.

Electronic control unit (engine computer), 3.0 E engine.

These ECUs have been sent to Germany for rebuilding. They were tested, repaired and the "usual suspects" were replaced. After that they were tested at hot and cold temperatures as well as under vibration. When the old unit is being returned, $ 50.00 will be refunded. Diagram GR08-T02, Item 1.

Electronic control unit (engine computer), 3.9 E engine.

These ECUs have been sent to Germany for rebuilding. They were tested, repaired and the "usual suspects" were replaced. After that they were tested at hot and cold temperatures as well as under vibration. When the old unit is being returned, $ 50.00 will be refunded. Diagram GR08-T02, Item 1.

New injection valve for the 3.0 E engine. If old injection valves are being returned, $ 10.00 per injection valve will be refunded. Diagram GR08-T02, Item 16.

Rebuilt injection valve for the 3.0 E engine. If old injection valves are being returned, $ 10.00 per injection valve will be refunded. Diagram GR08-T02, Item 16.

New injection valve for the 3.9 E engine. If old injection valves are being returned, $ 10.00 per injection valve will be refunded. Diagram GR08-T02, Item 16.

Rebuilt injection valve for the 3.9 E engine. If old injection valves are being returned, $ 10.00 per injection valve will be refunded. Diagram GR08-T02, Item 16.

Adapter plate where injection valve mounts to. Diagram GR08-T02, Item 20.

Gasket for adapter plate. Diagram GR08-T02, Item 21.

Rubber ring that goes around injection valve body and under bracket that holds injection valve in place. Diagram GR08-T02, Item 17.

Rubber ring that goes around the tip of the injection valve and seals it against adapter plate. Diagram GR08-T02, Item 18.

Bracket that holds injection valve in place. Diagram GR08-T02, Item 23.